Here is a friction fit stand for mounting a Pico inside a GameCube console next to the fan.
The stand has option to use M2 x 5MM screws to secure the pico into the mount.
The mount fixes into the gamecube using an original screw found in the installation location, simply remove the original screw, put the bracket into place, and screw the original screw back in to secure the mount.
Tested with official Raspberry Pi Pico board.
UPDATE: 01/0//2022
New remix uploaded (remixed and provided by AmyGrrl) to add support for Pico W. AmyGrrl added a small internal pocket hole to allow room for SMD components that would be incompatible with the original stand design.
Printed in ABS is probably recommended due to potential heat inside of a games console.
By ZedLabz
The stand has option to use M2 x 5MM screws to secure the pico into the mount.
The mount fixes into the gamecube using an original screw found in the installation location, simply remove the original screw, put the bracket into place, and screw the original screw back in to secure the mount.
Tested with official Raspberry Pi Pico board.
UPDATE: 01/0//2022
New remix uploaded (remixed and provided by AmyGrrl) to add support for Pico W. AmyGrrl added a small internal pocket hole to allow room for SMD components that would be incompatible with the original stand design.
Printed in ABS is probably recommended due to potential heat inside of a games console.
By ZedLabz
