Updating Hekate, Atmosphere, and HOS

Since I only update HOS when needed I don't do this very often which usually means I've forgotten something. Rather than just writing notes to myself I figured I'd write to everyone.

Yes, there are packs that will do this, but they have the potential to introduce other hang-ups and can undo any customizations you may have done. This guide is for educating your self on the entire process.

Standard disclaimers apply, I'm not responsible for things going south.

Acronyms:
HOS: Horizon/Switch OS
AMS: Atmosphere

Dependency order:
Hekate -> Atmosphere -> HOS -> Games

What usually happens is a game requires a higher version of HOS, this then requires a higher version of AMS and Hekate.

1. Start by grabbing the latest versions of Hekate, AMS, and fusee.bin:
   https://github.com/CTCaer/hekate/releases
   https://github.com/Atmosphere-NX/Atmosphere/releases
2. Create a folder on your computer named switch_sd
3. Extract Hekate and AMS to this folder
4. Move fusee.bin to the switch_sd/bootloader/payloads folder
5. Rename the hekate_ctcaer_X.X.X.bin file to payload.bin

Now a word about sigpatches. If you're updating to a major version release of AMS (1.4.x -> 1.5.x) You likely need updated sigpatches. If you're updating a major HOS version (15.x.x -> 16.x.x) you WILL need new sigpatches. Sigpatches can be located with some searching but they cannot be direct linked here.

If you're updating sigpatches, they go in the following locations:

• switch_sd/bootloader/patches.ini
• switch_sd/atmosphere/exefs_patches (I usually forget this one and then games refuse to load)
• switch_sd/atmosphere/kip_patches

Now a word about mods and overlays (Tesla). If you're updating to a major version release of AMS (1.4.x -> 1.5.x) you likely need to update these as well. For any mods you've added, you will need to either find updates for them and copy them into the switch_sd folder or rename the
atmosphere/contents and atmosphere/kips
folders on your Switch SD card to contents.bak and kips.bak respectively. This will prevent issues with incompatible modules but obviously you won't have your modules/cheats/mods until you update/merge them back to their respective folders. If the mods you're using have source available, you can usually compile your own version of the mod for the new AMS version but that's out of scope for this tutorial.

Overlays are located in the
/switch/.overlays
folder on your Switch SD card. Either update, move, or delete ones that aren't built for your new version of AMS/HOS.

Finally you should have everything ready to update Hekate & AMS. AMS cannot be updated while its running so:

1. Reboot to Hekate and mount the SD card with the USB tools
2. Make a backup of your existing atmosphere and bootloader files if you wish
3. Make a backup of your payload.bin file if you wish
4. Copy the contents of the switch_sd folder to the Switch SD card and overwrite any existing files
5. Rename the atmosphere/contents and atmosphere/kips folders if you've not updated your mods
6. Reboot and you should be running the current version of Hekate & Atmosphere

Themes: For HOS themes it is recommended to delete/rename the
/atmosphere/contents/0100000000001000
folder on your Switch SD card and re-create with a current version of NXThemes Installer after you've updated HOS. It also sounds like there is an option in NXThemes Installer to do this for you.

If everything is working you should now be ready to update HOS.

1. Locate the firmware you wish to update to. Again this cannot be linked here but is available with some searching
2. Extract it to a folder and copy this folder to your Switch SD card
3. Boot to emummc or sysmmc depending on which one you want to update
4. Use Daybreak to update the HOS version. Select fat32+exFAT even if you don't use exFAT to prevent any issues in the future
5. Reboot when prompted

Congratulations! You've updated Hekate, AMS, and HOS.