GETTING WIFI TO WORK ON DESMUME
First you will need a couple of things:
A Computer(of course)
A wired internet connection (via LAN cable)
Win PCap(PROVIDED)
A wi-fi compatible DesmuME(PROVIDED)
Any wi-fi compatible game.(DO NOT ASK FOR ANY LINKS TO ROMS OF COURSE....)
STEP 1 : Download this pack DesmuME wifi pack this contains Win Pcap and the other things you will need. Also a version 0.9.7 of desmuME with wifi capabilities enabled by slytherx HERE.Whichever version of desmume you are using ( 32 or 64 bit) in its own folder... along with any other files the emu may need in that same folder along with it.
STEP 2: Unzip contents and Install Win Pcap.After installation make sure and give Win Pcap exceptions in all firewall software..When installing Winpcap..check the option for starting the driver as windows starts up.
STEP 3: Open DesmuME(IMPORTANT NOTE....ALL WINDOWS 7/WINDOWS VISTA USERS MUST OPEN DESMUME AS AN ADMINISTRATOR OR ELSE AN ERROR WOULD OCCUR WHEN CONNECTING TO WIFI" and go to Config--->Emulation settings. Now set the correct paths for the ARM 7 BIOS, ARM 9 bios and Firmware bin...of course it would be wherever you downloaded it to...Make sure the "Use external Bios image" "Use external firmware image" ,"Boot from firmware like the nds" AND "Enabled Advanced bus level timing" are all checked...I am not sure about the rest so leave them unchecked.. It would now look like this...
http://img153.imageshack.us/i/setupg.png
STEP 4: IN desmuME still go to Conifg---> wifi and click on "Infrastructure mode"
STEP 5:Now open your game and go into Nintendo Wi-fi settings and search for an access point...u should see "SOFT AP" as one...test connection to that and it should work...I think this must be done every time you open/close the emulator....(Hey can't be too perfect)
STEP 6:Enjoy....
TRYFORCE's TUTORIAL ON GETTING WIFI TO WORK ON DesmuME ON ANDROID COMPATIBLE DEVICES
BEFORE ANY OF THE FOLLOWING MAKE SURE THESE THINGS ARE DONE FIRST:
-Again..have a wired connection by a cable (lan cable)
-Run desmuME as an administrator
-"For anyone getting 'Unable to get IP address' or 'Unable to connect to Nintendo Wi-fi network' errors, you need to check your router firewall settings. I use DD-WRT and an enabled SPI Firewall will not allow you access, disabling that let everything work fine.(by Forumpost)
-Disabling any firewalls that you think would be blocking the process...
-WINDOWS 7/WINDOWS VISTA users must go to network and sharing center and make sure that your connection type is set to HOME network and NOT PUBLIC OR WORK(work may work but meh)
-In the Wi-fi settings in desmume make sure it is set ton infrastructure mode and also the correct bridging is enabled with your ETHERNET CONTROLLER (your network adapter)
- Try pressing tab when connecting to nintendo wi fi connection..weird but might work
Emulator doesn't save: You would have to go into PATH SETTINGS and set your own paths for screenchots,cheats,roms,saveram etc.
Error Code 52000/52001/52002:Check your modem status and change it from bridging to PPPOE or PPPOA(sometimes work).Also double check the WEP key you entered(if used).Make sure if your on windows 7 that you have run the emulator as an administrator and also check that it's connection is an exception in your firewall/antivirus software
Error Code 52100:There could be Ip address conflict going on...you will have to give your ds its own ip address rather than using dhcp to find its own..check HERE
for help on doing that(too long to type..).Also you can try chaging the dns to 4.2.2.2 4.2.2.3 4.2.2
Error with saving wifi settings: "try keeping the external bios and firmware but without booting to ds on."
CREDITS GO TO:
DJPlace:Testing Mario kart ds
Dreamboy21: For information on the firewall exceptions and testing Tetris Ds
ryuga93:Info on error 52000
slytherx: HUGE THANKS for compiling the 0.9.7 version to use wi-fi
Forumpost: For information on disabling firewall in router settings
soc4real: For information on bridging connection with Ethernet controllers.
Tryforce:Another HUGE THANKS for tutorial on getting wi-fi to work using android devices.
Chojo: with help on error 52100
Jayc & 007 shinobi: Help on getting wifi settings to save
kay2kid: on help in "speed up connect" method
First you will need a couple of things:
A Computer(of course)
A wired internet connection (via LAN cable)
Win PCap(PROVIDED)
A wi-fi compatible DesmuME(PROVIDED)
Any wi-fi compatible game.(DO NOT ASK FOR ANY LINKS TO ROMS OF COURSE....)
STEP 1 : Download this pack DesmuME wifi pack this contains Win Pcap and the other things you will need. Also a version 0.9.7 of desmuME with wifi capabilities enabled by slytherx HERE.Whichever version of desmume you are using ( 32 or 64 bit) in its own folder... along with any other files the emu may need in that same folder along with it.
STEP 2: Unzip contents and Install Win Pcap.After installation make sure and give Win Pcap exceptions in all firewall software..When installing Winpcap..check the option for starting the driver as windows starts up.
STEP 3: Open DesmuME(IMPORTANT NOTE....ALL WINDOWS 7/WINDOWS VISTA USERS MUST OPEN DESMUME AS AN ADMINISTRATOR OR ELSE AN ERROR WOULD OCCUR WHEN CONNECTING TO WIFI" and go to Config--->Emulation settings. Now set the correct paths for the ARM 7 BIOS, ARM 9 bios and Firmware bin...of course it would be wherever you downloaded it to...Make sure the "Use external Bios image" "Use external firmware image" ,"Boot from firmware like the nds" AND "Enabled Advanced bus level timing" are all checked...I am not sure about the rest so leave them unchecked.. It would now look like this...
http://img153.imageshack.us/i/setupg.png
STEP 4: IN desmuME still go to Conifg---> wifi and click on "Infrastructure mode"
STEP 5:Now open your game and go into Nintendo Wi-fi settings and search for an access point...u should see "SOFT AP" as one...test connection to that and it should work...I think this must be done every time you open/close the emulator....(Hey can't be too perfect)
STEP 6:Enjoy....
TRYFORCE's TUTORIAL ON GETTING WIFI TO WORK ON DesmuME ON ANDROID COMPATIBLE DEVICES
TryForce said:
BEFORE ANY OF THE FOLLOWING MAKE SURE THESE THINGS ARE DONE FIRST:
-Again..have a wired connection by a cable (lan cable)
-Run desmuME as an administrator
-"For anyone getting 'Unable to get IP address' or 'Unable to connect to Nintendo Wi-fi network' errors, you need to check your router firewall settings. I use DD-WRT and an enabled SPI Firewall will not allow you access, disabling that let everything work fine.(by Forumpost)
-Disabling any firewalls that you think would be blocking the process...
-WINDOWS 7/WINDOWS VISTA users must go to network and sharing center and make sure that your connection type is set to HOME network and NOT PUBLIC OR WORK(work may work but meh)
-In the Wi-fi settings in desmume make sure it is set ton infrastructure mode and also the correct bridging is enabled with your ETHERNET CONTROLLER (your network adapter)
- Try pressing tab when connecting to nintendo wi fi connection..weird but might work
Emulator doesn't save: You would have to go into PATH SETTINGS and set your own paths for screenchots,cheats,roms,saveram etc.
Error Code 52000/52001/52002:Check your modem status and change it from bridging to PPPOE or PPPOA(sometimes work).Also double check the WEP key you entered(if used).Make sure if your on windows 7 that you have run the emulator as an administrator and also check that it's connection is an exception in your firewall/antivirus software
Error Code 52100:There could be Ip address conflict going on...you will have to give your ds its own ip address rather than using dhcp to find its own..check HERE
for help on doing that(too long to type..).Also you can try chaging the dns to 4.2.2.2 4.2.2.3 4.2.2
Error with saving wifi settings: "try keeping the external bios and firmware but without booting to ds on."
CREDITS GO TO:
DJPlace:Testing Mario kart ds
Dreamboy21: For information on the firewall exceptions and testing Tetris Ds
ryuga93:Info on error 52000
slytherx: HUGE THANKS for compiling the 0.9.7 version to use wi-fi
Forumpost: For information on disabling firewall in router settings
soc4real: For information on bridging connection with Ethernet controllers.
Tryforce:Another HUGE THANKS for tutorial on getting wi-fi to work using android devices.
Chojo: with help on error 52100
Jayc & 007 shinobi: Help on getting wifi settings to save
kay2kid: on help in "speed up connect" method