Related Links
Official Site
IGN Review
List of available Pokemon
Lets play gameplay from @[member='ShawnTRods']
Scene Release
Pokemon Codes
Dratini: Sr5Z5GqAgR
Gyarados: mq2xRVNgRL
Panpour: CNZF3wpq3x
Pansear: niE33w9rwM
Oshawott: frCLRpXG88
Gible: LTb3n3RYJ8
Cinccino: vVALFrGTXX
Darmanitan: pK5RgzqLG8
Sneasel: CMqkZRRSRX
Larvitar: Rc338MpqLx
Beldum: BqWxXEK3xg
Axew: Lpu3ggCYk8
Emolga: Jnm3kqgN8X
Lapras: FZP8GqRZRR
Scyther: Shw8mxRAJR
Riolu: 8GV3LMGrnM
Pikachu: GfV33RVN3F
Larvesta: yQAw81qxGR
Deino: 8rf3XPwvJw and PKSRGpCPZJ
Chimchar: DNB3x2gCgk
Lilligant: RwGxLbHRRk
Gible: J3mmJr9rX8
Zoroark: 6iYmwq1Y8w
Snivy: XyADXkr138
Misdreavus: mnKX3qwrZR
Whimsicott = juKxxqGP88
Event Codes
EDw8w2HaRn - Keiji special mission
J2TRZXPUm3 - Motonari and Motochika
gauRnak2nR - Okuni special mission
2aL38Ek2Rx - Ranmaru special mission
2rz3XFEKxR - Reshiram event
ROM Info
Code:
Archive Name : pkmnconquest.rar
Archive Filesize: 54.37MB
ROM Name : VYPTv00.nds
-----------------------------
Header Info for : VPYTv00.nds
-----------------------------
Internal Name : PSL_E
Game Serial : NTR-VPYT-???
Maker Code : 01
Publisher : Nintendo
Version : 1.0 (00h)
Secure Checksum : A23C (BAD)
Logo Checksum : CF56 (OK)
Header Checksum : C0C0 (OK)
File Size : 2048Mbit (268435456 bytes)
Card Size : 2048Mbit (268435456 bytes) (0Bh)
File CRC32 : BB2616E3
-----------------------------
Language 1
-----------------------------
Pokemon Conquest
Nintendo
Emulator Compatibility
DeSmuME v0.9.8 - Confirmed Working
No$GBA v2.6a - Confirmed Working with Patch
- IPS Patch Download (file only, requires separate IPS patcher to apply) (Credits go to 2CH)
- IPS Patch Download (includes its own patcher, easier to use) (Credits go to 2CH)
Flashcart Compatibility
SuperCard DSTWO - Confirmed Working with Clean Mode Enabled + Latest Loader v1.15
- Loader v1.15 Download (Just use a clean ROM; no patch needed!)
Acekard 2i (with AKAIO) - Confirmed Working with Patch + Latest Loader v1.8.9zI'd just like to point out that the download link for the latest "loader" for the DSTWO is a link to the latest firmware, not the latest EOS. The EOS is what could potentially change compatibility, not the firmware. Thus, I'd recommend linking to the latest version of the EOS.
- IPS Patch Download (file only, requires separate IPS patcher to apply) (Credits go to 2CH)
- IPS Patch Download (includes its own patcher, easier to use) (Credits go to 2CH)
Read this for clarification on getting it to work:
R4 - Confirmed Working with Wood v1.49 (no patch needed!)It worked!!!!THIS. THIS. 100 TIMES THIS. The AKAIO forum post labeled 1.8.9z is NOT the same thing as the loaders. Go to http://akaio.net/loaders/(not sure if I'm allowed to post links here, I'm new here. If not I'll edit this post) and replace the "1.8.9z loader" with this one. I can confirm, having followed all the other steps correctly and getting errors up until this point, that this is what will fix the error for Acekard 2i users.Not the full akaio thing, the updated loader from the akaio website
I think it should be clarified on the front page that you need to download from the loaders page rather than AKAIO 1.8.9z post on their forums. While it should have the same loader, there's obviously a difference between the full install and the loader-only download.
so far atleast
R4i SDHC / R4 III / DSTT YSMENU - Confirmed Working with Patch + Latest Loader
- IPS Patch Download (file only, requires separate IPS patcher to apply) (Credits go to 2CH)
- IPS Patch Download (includes its own patcher, easier to use) (Credits go to 2CH)
- YSMenu v6038 DAT - (How to use these files)
- RetroGameFan's (RGF) kernel for R4SDHC users and anyone else getting the "errcode=-4" - All you need is this, the game and the YSMenu DAT
- Dicastia Patch (Drag-N-Drop) - Alternate solution if you keep getting the "-4 error code" (apparently works with latest R4 SDHC kernel without YSMenu)
- IPS Patch Download (file only, requires separate IPS patcher to apply) (Credits go to 2CH)
- IPS Patch Download (includes its own patcher, easier to use) (Credits go to 2CH)
- IPS Patch Download (file only, requires separate IPS patcher to apply) (Credits go to 2CH)
- IPS Patch Download (includes its own patcher, easier to use) (Credits go to 2CH)
- IPS Patch Download (file only, requires separate IPS patcher to apply) (Credits go to 2CH)
- IPS Patch Download (includes its own patcher, easier to use) (Credits go to 2CH)
- IPS Patch Download (file only, requires separate IPS patcher to apply) (Credits go to 2CH)
- IPS Patch Download (includes its own patcher, easier to use) (Credits go to 2CH)
I can confirm that its working on the M3 Real DS on a Ds lite, using the latest YSMENU and the unoffical DATS V6038
You do not need to run YSmenu on the M3 DS Real to run Pokemon Conquest, as long as you use the AP patch. 1.49 A X 3rd works great.
M3i Zero - *Confirmed working on older M3i Zero flashcarts (pre-"GMP-Z003") that can run YSMenu.
- IPS Patch Download (file only, requires separate IPS patcher to apply) (Credits go to 2CH)
- IPS Patch Download (includes its own patcher, easier to use) (Credits go to 2CH)
The patched game is also running great on the M3i Zero GMP-Z003 with M3 Sakura 1.49 A X 3rd.
iTouch DS - Unconfirmed (refer to this post)
Mac Users
DS ROM Patcher for Mac OS X - If you are on a Mac, use this to apply the IPS patch by 2CH.
Warning from the GP Staff
Just letting you all know that I'm watching this thread and anyone else who asks for the ROM via PM will be suspended for 1 week.
Anyone who creates an account just to post ROM links will be permanently banned, no warnings.
I'm going to have so many people hating me by tonight.
This is just a warning!
I want to add that any roms uploaded to filetrip will result in an immediate ban from filetrip.
If anyone finds any roms on Filetrip, please report them so they can be handled.